dl385p g8 manual

dl385p g8 manual

Video connector 12. Asset Tag 12. iLO connector 13. USB connector 13. Serial connector 14. 8 SFF HDD Bays 14. FlexibleLOM ports (Shown: 4 ports 1Gb each-Port 1-4 starting Right to Left) 15. Optional Slim Optical Bay 16. Video connector What's New Updating supported options. QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Overview DA - 14329 North America — Version 25 — December 13, 2013 Page 1 Next Overview. With enhanced innovations in performance, feature flexibility, and management capabilities, the DL385p. Page 2: Standard Features QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Standard Features. Page 3 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Upgradeability Upgradeable to 2 processorsPage 4 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Network Controller HP ProLiant Gen8 servers offer a new networking technology. Page 5 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Server ROM HP ROM (Read Only Memory) is now digitally. Page 6 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Standard FeaturesDrive bays 1-12 are on routed to expander. Page 7 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Server Power Cords All Pre-configured Models servers ship with a high. Page 8 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). One of. Page 9 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). On System Management HP iLO Management HP iLO Management Engine is. Page 10 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Insight management HP Service Pack for HP Service Pack for. Page 11 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Warranty This product is covered by a global limited warranty and. Page 12: Optional Features QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Optional Features. HP Insight management HP Insight Control HP Insight Control, a product. Page 13 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Optional FeaturesPage 14 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8).http://extintoresorigen.com/images/editor/brush-bandit-150-manual.xml

• dl385p g8 service manual, 1.0, dl385p g8 service manual.

HP Proactive Insight Prevent problems with innovative, automated monitoring tools and. Page 15: Service and Support QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Service and Support. Service and Support HP Technology Services for Industry Standard Servers. Page 16 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Standard Care Standard Care: Service recommendation that maintains high. Page 17 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Support Center Personalized online support portal with access to. Page 18: Pre-configured Models QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Pre-configured Models. Page 19 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Storage Centric Models. Page 20 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Dedicated Workload Models. NOTE: This Model is Energy Star Certified. HP. Page 21 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Maximized Consolidation Models. NOTE: These Models are Energy Star Certified. HP. Page 22: Smart Buys QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Smart Buys. Page 23 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Page 24 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Page 25: Configuration Information - Factory Integrated Models QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Configuration Information - Factory Integrated Models. NOTE: This section lists some of the. Page 26 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Page 27 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Step 2: Choose Required Options (only one. Page 28 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Configuration Information - Factory Integrated ModelsPage 29 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Configuration Information - Factory Integrated ModelsConfiguration Information - Factory Integrated Models. Converged Infrastructure HP OneView with iLO Advanced. Page 31: Core Options QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Core Options.http://www.elmor.com.pl/userfiles/brush-bandit-200-parts-manual.xml

NOTE: Some options may not be integrated at the factory. Contact. Page 32 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Memory NOTE: To realize the performance memory capabilities listed in. Page 33 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Core OptionsPage 34 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Core OptionsPage 35 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Core OptionsPage 36 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Networking Gigabit Server adaptersPage 37 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP InfiniBand QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA. Page 38 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Core OptionsPage 39: Additional Options QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Additional Options. NOTE: Some options may not be integrated at the factory. To. Page 40 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). High Performance HP Cluster Management Utility. Clusters HP Insight Cluster Management. Page 41 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Security HP Trusted Platform Module Option 488069-B21Additional OptionsAdditional Options. HP Tape Backup NOTE: For the complete range of tape drives. Page 44 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Storage Options Storage Fibre Channel HBAPage 45 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Additional OptionsAdditional Options. HP Remote Monitoring HP Remote Monitored Power Distribution Unit: 1U Version. Page 47 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). HP Intelligent Power iPDU Core Units. Distribution Units (iPDU) HP 4.9kVA. Page 48 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Additional OptionsAdditional OptionsAdditional Options. HP Care Pack Services Proactive CarePage 51: Memory QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Memory. For detailed memory configuration rules and guidelines, please use the Online DDR3.

Page 52 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). DL385p Gen8 Supported Memory Bandwidth and Capacity. DIMM Type Registered DIMMS Load. Page 53 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). MemoryPage 54 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Following are memory options available from HP. HP Memory NOTE: To realize. Page 55: Storage QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). StoragePage 56: Technical Specifications QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Technical Specifications. System Unit Dimensions (H x W x D) SFF Drives: 3.44. Page 57 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Technical SpecificationsPage 58 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Technical SpecificationsPage 59 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). Technical SpecificationsPage 60 QuickSpecs HP ProLiant DL385p Generation 8 (Gen8). And with flexible storage options of up to 25 small form factor or 12 large form factor internal drives with a max capacity of 48TB of SAS, SATA or solid state storage, connectivity with four on board gigabit NIC ports and expandability with up to 6 PCIe slots, the DL385p G8 shows versatility for support for everything from web applications to virtual desktop and databases. HP packs all of this power neatly into a compact 2U chassis, and Aventis Systems makes it all affordable for everyone from the SMB up through to the enterprise.All servers from Aventis System include a 3 year Comprehensive Warranty, with eligibility for optional Express warranties and onsite services. Are overpriced OEM memory options wasting your organization's IT hardware budget? We won’t. We’ll take you behind the closed doors of the memory industry. Here you can buy the same exact RAM installed in servers at the factory. Expert Technical Support Have a question about your HPE ProLiant DL385p Gen8 memory upgrade.

Our technical support can help you with any question to ensure you get the best module option for your HPE ProLiant DL385p G8 system. 100% Guaranteed Compatible Get proven HPE ProLiant DL385p Gen8 memory upgrades here. We ship approved, certified and OEM qualified modules to ensure total HPE ProLiant DL385p G8 system memory reliability. Quick Advance Replacement Nothing is perfect. Sometimes things happen. We support your HPE ProLiant DL385p G8 memory purchase long after the sale. Meet the increasing demands of your applications with more HPE ProLiant DL385p Gen8 memory. Expand system performance with an upgrade at lower costs today. DIMM Type Speed Configuration Guide Lifetime Warranty Lifetime Warranty Never worry. We support you long after the sale. LRDIMM and RDIMM Why are there various DIMM types supported. Factory configured DL385p Gen8 systems often have smaller, less expensive modules. As more memory is required different density and technologies are needed. DIMM type mixing is never recommended. What is a registered memory module. Registered DIMM memory modules have a register component between the DRAM modules and the motherboard memory controller. When manufactured as a dual in-line memory module (DIMM), a registered memory module is called an RDIMM. What is a load reduced memory module. Load reduced memory module technology uses a distributed data buffer to improve bandwidth efficiencies when scaling to higher capacities and speed on enterprise server systems. All LRDIMMs are registered but not all RDIMMs are LRDIMMs. LRDIMM or load-reduced DIMMs are (used in enterprise servers) support highest density modules and contain a memory buffer (MB) component usually made by IDT or Montage. The memory buffer minimizes the load on the server memory bus. LRDIMMs are commonly used to maximize HPE ProLiant DL385p G8. What HPE ProLiant DL385p Gen8 memory speed is supported.

DDR3-1066, DDR3-1333 and DDR3-1600 Why may there be various speeds of HPE ProLiant DL385p G8 memory. Some servers often have various configurations and versions. If you are unsure what you need, please refer to your DL385p Gen8 manual or data sheet. If you need tech support, please contact us. General DIMM population guideline for HPE ProLiant DL385p Gen8 upgrade to consider. Some may or may not apply. Do not mix DIMM LRDIMM and RDIMM types. If mixing memory speeds, all 4 DIMMs run at the lowest DDR3-1066 bus frequency. Install DIMMs starting furthest from the processor. Do not install DIMMs if the corresponding processor is not installed. If only one processor is installed in a two CPU system, only half of the DIMM slots are available. To maximize performance, balance the total memory capacity between all installed processors. It is not required, but it is recommended to load the channels similarly if possible. Why are there so many HPE ProLiant DL385p G8 upgrade options. IT buyers come from all walks of life. Some purchase by OEM part number. Some purchase by original module part number. Our goal is to give you confidence when purchasing HPE ProLiant DL385p Gen8 upgrades. All modules listed are qualified to work in your HPE ProLiant DL385p G8. Live Chat Have a question. Part Number or Product Description (required) Upload your list for us to quote. Or upload your list for us to buy back. Upload your file. Word, Excel, CSV. Browse. Maximum size 10MB Comments This field should be left blank Send Please wait. Name (required) Email address (required) Phone Number (required) Buy or Sell (required) Quote to purchase Quote for buy back Request a quote for a volume purchase or request a quote for a buy back offer from us. X A message to our customers We remain resolute in our obligation to support mission critical server and computing needs during the Covid 19 pandemic.

Essential health care, government, military, financial, educational and small businesses have our support. We continue to deliver. With designed-in quality and serviceability, performance and enhanced configuration flexibility, this customer-inspired design offers the perfect solution for virtualization, database, and dynamic computing workloads. Log in for price 3M Vertical Notebook Riser LX550 -. Log in for price Logitech M235 - Mouse - right-hande. Log in for price Lenovo Essential Wired Combo - Keyb. Log in for price. HP assu mes you are qu alified t o serv ice com puter equipm ent and are tr ained in recogn izing ha zards in produ cts with hazardou s energ y level s. Part Num ber: 669443 - 004 March 2014 Edition: 4 1 2 3. 112 Summary of content (112 pages) Page 1 HP ProLiant Gen8 Troubleshooting Guide Volume I: Troubleshooting Abstract This document describes common procedures and solutions for the many levels of troubleshooting HP ProLiant Gen8 servers. This document is intended for the person who installs, administers, and troubleshoots servers or server blades. HP assumes you are qualified to service computer equipment and are trained in recognizing hazards in products with hazardous energy levels. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. AMD is a trademark of Advanced Micro Devices, Inc. Page 3 Contents Using this guide. 7 How to use this guide. 7 What's new. 8 Revision history. Page 4 POST problems flowchart. 36 OS boot problems flowchart. 38 Fault indications flowchart. 40 Hardware problems. Page 5 HP iLO. 71 Intelligent Provisioning. 72 HP Insight Remote Support software. 74 HP Insight Online. Page 6 Server and option specifications, symbols, installation warnings, and notices.

89 Teardown procedures, part numbers, specifications. 89 Teardown or removal and replacement procedure videos. 89 Technical topics. Page 7 Using this guide How to use this guide The HP ProLiant Gen8 Troubleshooting Guide, Volume I: Troubleshooting, part number 669443-XXX, focuses on troubleshooting procedures for HP ProLiant Gen8 ML, DL, BL, and SL servers. The complete list of Gen8 error messages is not included in this volume, but is included in HP ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages. IMPORTANT: This guide provides information for multiple servers. Some information may not apply to the server you are troubleshooting. Page 12 This symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before touching.If not, then what do the health LEDs indicate. Is video display available. If server completes POST and video is available, are there any POST error messages. Record the text of the POST error message as displayed. Page 15 2. Record any error messages displayed by the system. 3. Remove all CD-ROMs, DVD-ROMs, and USB drive keys. 4. Collect all tools and utilities, such as a Torx screwdriver, loopback adapters, ESD wrist strap, and software utilities, necessary to troubleshoot the problem.Page 19 DIMM installation and configuration guidelines DIMM population order and configuration is critical in maximizing performance for the system. For more information, see the server label on the server or the server user guide on the HP website ( ). Component LED definitions Many common problems can be identified by reviewing the component and server LEDs. For more information, see the server and component documentation on the HP website ( ). Page 20 Item LED Status Definition Flashing amber The drive is not configured and predicts the drive will fail. Solid amber The drive has failed.

Off The drive is not configured by a RAID controller. Off (Server blade) If the Health Status LED bar is off, then the system has no power. HP iLO consists of an intelligent processor and firmware that allows for remote server management. The HP iLO VSP provides bi-directional data flow with a server serial port. Using VSP, you can operate as if a physical serial connection exists on the remote server serial port. Page 23 provides continuous monitoring of hardware and configuration changes, system status, and service alerts for various server components. The Agentless Management Service is available in the SPP, which is a disk image (.iso) that you can download from the HP website ( ). From this page, you can do the following: o Verify the status of iLO Self-Test Results.If you detect problems with the server after a ROM flash, then the screen enables you to revert back to a previous working ROM configuration. 7. Page 25 6. If the blade is not displayed in the Insight Display on the enclosure or within the OA GUI, then troubleshoot the issue further using the procedures in the HP BladeSystem c-Class Enclosure Troubleshooting Guide on the HP website ( ). Using the OA CLI 1. 2. For systems using OA firmware 3.60 or later, execute the SHOW HEALTH CLI command and review possible degraded sections to review health status for the entire enclosure. Enter the product name and click Go. Select the product, and then locate the link for the maintenance and service guide.Select Manuals, and then locate the link for the maintenance and service guide. 3. Page 28 Start diagnosis flowchart Use the following flowchart to start the diagnostic process. Page 29 The Remote diagnosis flowchart provides a generic approach to troubleshooting a server from a remote location. Page 30 General diagnosis flowchart The General diagnosis flowchart provides a generic approach to troubleshooting.

If you are unsure of the problem, or if the other flowcharts do not fix the problem, use the following flowchart. Power-on problems flowchart Server power-on problems flowchart (non-blade servers) For the location of server LEDs and information on their statuses, see the server documentation on the HP website ( ). Server blade power-on problems flowchart for Intel server blades For the location of server LEDs and information on their statuses, see the server documentation on the HP website ( ). Page 37 Server POST problems flowchart (non-blade servers) Diagnostic flowcharts 37 Page 38 Server blade POST problems flowchart OS boot problems flowchart Several packaging changes have taken place with HP ProLiant Gen8 servers: SmartStart CDs and the Smart Update Firmware DVD no longer ship with these new servers. Instead, the deployment capability is embedded in the server as part of Intelligent Provisioning. The system health LED provides the same functionality as the two separate internal and external health LEDs. Depending on the model, the internal health LED and external health LED may either appear solid or they may flash. Both conditions represent the same symptom. Page 42 Server blade fault indications flowchart Diagnostic flowcharts 42 Page 43 Hardware problems Procedures for all ProLiant servers The procedures in this section are comprehensive and include steps about or references to hardware features that may not be supported by the server you are troubleshooting. If the LEDs indicate a problem with a power supply (red, amber, or off), then check the power source. If the power source is working properly, then replace the power supply. Page 45 5. Be sure the line cord is connected. 6. Be sure each circuit breaker is in the On position, or replace the fuse if needed. If this occurs repeatedly, contact an authorized service provider. 7. Check the UPS LEDs to be sure a battery or site wiring problem has not occurred. See the UPS documentation. 8.

If the UPS sleep mode is initiated, disable sleep mode for proper operation. The UPS sleep mode can be turned off through the configuration mode on the front panel. 9. Page 46 6. Be sure all cables are connected to the correct locations and are the correct lengths. For more information, see the server documentation on the HP website ( ). 7. Be sure other components were not accidentally unseated during the installation of the new hardware component. 8. Be sure all necessary software updates, such as device drivers, ROM updates, and patches, are installed and current, and the correct version for the hardware is installed. Page 47 CAUTION: Only authorized technicians trained by HP should attempt to remove the system board. For more information, see the device documentation. Internal system problems CD-ROM and DVD drive problems System does not boot from the drive Action: 1. Be sure the drive boot order in RBSU or the UEFI System Utilities is set so that the server boots from the CD-ROM drive first. 2. Be sure no loose connections (on page 17) exist. 3. Page 49 2. Check to see if an update is available for any of the following: o Smart Array Controller firmware o Dynamic Smart Array driver o Host bus adapter firmware o Expander backplane SEP firmware o System ROM 3. Be sure the drive or backplane is cabled properly. 4. Be sure the drive data cable is working by replacing it with a known functional cable. 5. Be sure drive blanks are installed properly when the server is operating. Drives may overheat and cause sluggish response or drive failure. 6. Page 50 12. Be sure that the correct controller drivers are installed, and that the controller supports the hard drives being installed. 13. If the controller supports Smart Array Advanced Pack (SAAP) license keys and the configuration is dual domain, be sure the SAAP license key is installed. For more information, see the HP website ( ). 14.

If SAS expanders are used, be sure the Smart Array controller contains a cache module. 15. Page 51 Storage problems When installing an OS, the OS installation does not recognize the HP Dynamic Smart Array B120i RAID controller or HP Dynamic Smart Array B320i RAID controller drives Action: Manually install the HP Dynamic Smart Array B120i RAID controller or the HP Dynamic Smart Array B320i RAID controller drivers. For more information, see the controller documentation. Page 52 Fan problems General fan problems are occurring Action: 1. Be sure the fans are properly seated and working. a. Follow the procedures and warnings in the server documentation for removing the access panels and accessing and replacing fans. b. Unseat, and then reseat, each fan according to the proper procedures. c. Replace the access panels, and then attempt to restart the server. 2. Be sure the fan configuration meets the functional requirements of the server. See the server documentation. 3. Page 53 3. Be sure hot-plug fan requirements are being met. Refer to the server documentation. All fans in an HP BladeSystem c-Class enclosure are operating at a high speed.while fans in the other enclosures are operating at normal speed. Action: If all fan LEDs are solid green but the fans in the enclosure are operating at a higher speed than normal, then access more information from the OA or HP iLO. Review the FAN section in OA SHOW ALL to locate the fan zone that is consuming more FAN speed.Some servers may require that memory banks be populated fully or that all memory within a memory bank must be the same size, type, and speed. See the message displaying memory count during POST. 4. Be sure the server supports the number of processor cores. Some server models only support 32 cores and this may reduce the amount of memory that is visible. Server fails to recognize new memory Action: 1. Be sure the memory is the correct type for the server and is installed according to the server requirements.

Page 56 5. If the server has only one processor installed, replace it with a known functional processor. If the problem is resolved after you restart the server, the original processor failed. However, in most cases, a system ROM update is not required. If the system ROM does not support the new stepping processor, the system does not display any message. For system ROM update requirements, see the documentation that ships with the processor. Page 58 CAUTION: Running the Drive Assessment Test overwrites the tape. Some high-power graphics adapters require specific cabling, fans, or auxiliary power. For more information about adapter power requirements, see the documentation that ships with the graphics option or see the vendor website. For more information about server power capabilities, see the server documentation on the HP website ( ). Page 60 11. Be sure the video driver is current. For driver requirements, see the third-party video adapter documentation. Monitor does not function properly with energy saver features Action: Be sure the monitor supports energy saver features, and if it does not, disable the features. If using an older cable that could be near the life expectancy, replace the Mini SAS cable. Network controller or FlexibleLOM stopped working when an expansion board was added Action: 1. Be sure no loose connections (on page 17) exist. 2. Be sure the server and operating system support the controller. For more information, see the server and operating system documentation. 3. Page 63 Action: HP recommends that you access drive data only when the same RAID or non-RAID mode is enabled. Back up and restore the data on the drives. The Smart Array controller does not show logical drives after moving drives to a new server or JBOD Action: A drive migration issue has occurred. Be sure to follow all drive roaming rules when migrating drives.

Page 64 Software problems The best sources of information for software problems are the operating system and application software documentation, which may also point to fault detection tools that report errors and preserve the system configuration. Other useful resources include HP Insight Diagnostics (on page 73) and HP SIM. Use either utility to gather critical system hardware and software information and to help with problem diagnosis. Page 65 Operating system updates Use care when applying operating system updates (Service Packs, hotfixes, and patches). Before updating the operating system, read the release notes for each update. If you do not require specific fixes from the update, it is recommended that you do not apply the updates. Some updates overwrite files specific to HP. If you decide to apply an operating system update: 1. Perform a full system backup. 2. Apply the operating system update, using the instructions provided. 3. Page 66 Linux resources For troubleshooting information specific to Linux operating systems, see the Linux for ProLiant website ( ). For more information, see the cfg2html website ( ). Page 67 ROM problems Remote ROM flash problems Command-line syntax error If the correct command-line syntax is not used, an error message describing the incorrect syntax is displayed and the program exits. Correct the syntax, and then restart the process. Access denied on target computer If you specify a networked target computer for which you do not have administrative privileges, an error message is displayed describing the problem, and then the program exits. Page 70 Software tools and solutions Server mode The software and configuration utilities presented in this section operate in online mode, offline mode, or in both modes. Depending on the server model, your server may not support all of the tools and solutions in this section. All software and configuration utilities listed in this table are not supported on all HP ProLiant Gen8 servers.

Page 71 HP iLO The HP iLO subsystem is a standard component of HP ProLiant servers that simplifies initial server setup, server health monitoring, power and thermal optimization, and remote server administration. The HP iLO subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface. This design makes HP iLO independent of the host server and its operating system. HP iLO enables and manages the Active Health System (on page 71) and also features Agentless Management. HP Active Health System does not parse or change operating system data from third-party error event log activities, such as content created or passed through by the operating system. For more information about Intelligent Provisioning software, see the HP website ( Page 74 To access the Erase Utility, click the Perform Maintenance icon from the Intelligent Provisioning home screen, and then select Erase. For more information about the Erase Utility, see the HP Intelligent Provisioning User Guide on the HP website ( ). Page 75 respond to that information more quickly. With specific authorization from you, an authorized HP Channel Partner can also view your IT environment remotely at HP Insight Online. Page 76 To access the HP Smart Update Manager User Guide, see the HP SUM Information Library ( ). Page 77 NOTE: The server may not support all the following examples. Drives installed Drives used RAID level 1 1 RAID 0 2 2 RAID 1 3, 4, 5, or 6 3, 4, 5, or 6 RAID 5 More than 6 0 None To change any ORCA default settings and override the auto-configuration process, press the F8 key when prompted. For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the HP RBSU Information Library ( ). Page 78 Warning: The serial number should ONLY be modified by qualified service personnel. This value should always match the serial number located on the chassis. 5. Press the Enter key to clear the warning. 6.